阅读| 订阅
阅读| 订阅
扫描振镜

美国CTI剑桥公司6800系列振镜|CTI6800HP|CTI6810P|CTI6850P振镜

星之球科技来源:搜狐博客:激光百度百科2011-07-19我要评论(0)

美国CTI剑桥公司6800系列振镜、CTI6800HP、CTI6810P、CTI6850P系列振镜出售及维修咨询15990199065顾先生。CTI6810P振镜维修及供应,美国剑桥(CTI)6850P振镜出售及维修...

美国CTI剑桥公司6800系列振镜、CTI6800HP、CTI6810P、CTI6850P系列振镜出售及维修咨询15990199065顾先生。CTI6810P振镜维修及供应,美国剑桥(CTI)6850P振镜出售及维修,CTI6800HP系列振镜出售及维修

CTI6800HP CTI6810P CTI68580P系列振镜结合剑桥科技的移动磁铁驱动器首创的专利技术和我们的双光位置检测器的设计。这种组合提供了一个紧凑的高定位速度和精度,降低成本闭环电流计。 CTI6800HP CTI6810P CTI68580P系列扫描系统可以被设计提高系统的速度为目标大小,成本和准确性同典型的光束直径在3之间毫米,10毫米。

虽然,CTI6800HP CTI6810P CTI68580P系列不推荐看到振为,由于在6200系列的进步,我们的客户,仍然使用不断取得成功的CTI6800HP CTI6810P CTI68580P系列galvos许多新的设计选型指南。剑桥科技的承诺,客户满意度和产品可靠性意味着我们将继续生产和服务的CTI6800HP CTI6810P CTI68580P系列。

特点
振镜速度和步骤的快速响应时间:CTI6800HP CTI6810P CTI68580P系列是专门设计用来最大限度地提高系统的高速应用的性能。凭借我们与我们的678伺服驱动器驱动器结合先进的设计,CTI6800HP CTI6810P CTI68580PHP可达1-2在小角度范围内变动300微秒响应时间步千赫的速度。
保持定位精度,在高速的重复性:CTI的先进的光学定位器提供高定位精度高的速度和可重复性。在与我们的671伺服驱动器的组合,可以达到20 microradians CTI6800HP CTI6810P CTI68580PHP短期重复性。
高系统性能和可靠性随着时间:高级产品寿命和纪律的设计技术,在轴承技术和质量最好的制造工艺和工艺可靠性。制造质量保证性能的一致性,你需要设计的高品质系统剑桥科技的高标准要求在当今竞争激烈的市场。
Model 6810P Moving Magnet Optical Position Detector Scanner(CTI6810P系列扫描振镜)
Supports 5 mm apertures.

Galvanometer Specifications
All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up All angles are in mechanical degrees. Consult manual for complete operating instructions.

Mechanical
Rated Angular Excursion: 40°
Rotor Inertia: 0.1 gm*cm2, +/-10%
Torque Constant: 5.7X104 dyne-cm/amp, +/-10%
Maximum Coil Temperature: 110° C
Thermal Resistance (Coil to Case): 2.0° C/Watt, Max

Electrical/Drive Mechanism
Coil Resistance: 3.4 Ohms, +/-10%
Coil Inductance: 160uH, +/-10%
Back EMF Voltage: 0.10mV/degree/sec, +/-10%
RMS Current: 2.6 Amperes at Tcase of 50° C, Max
Peak Current: 12 Amperes, Max
Small Angle Step Response Time: 0.4ms, with balanced load

Position Detector
Linearity: 98%, Minimum, over 30 degrees
Scale Drift: 0.05 %/° C, Maximum
Zero Drift: 0.01 degree/° C, Maximum
Repeatability, Short Term: 20 microradians
Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20%
Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20%

Model 6800HP Moving Magnet Optical Position Detector Scanner(CTI 6800HP系列扫描振镜)

Supports 3 mm apertures

Galvanometer Specifications
All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up All angles are in mechanical degrees. Consult manual for complete operating instructions.

Mechanical
Rated Angular Excursion: 40°
Rotor Inertia: 0.018 gm*cm2, +/-10%
Torque Constant: 2.5X104 dyne-cm/amp, +/-10%
Maximum Coil Temperature: 110°C
Thermal Resistance (Coil to Case): 4.0°C/Watt, Max

Electrical/Drive Mechanism
Coil Resistance: 4.2 Ohms, +/-10%
Coil Inductance: 96uH, +/-10%
Back EMF Voltage: 0.04mV/degree/sec, +/-10%
RMS Current: 1.6 Amperes at Tcase of 50°C, Max
Peak Current: 6 Amperes, Max
Small Angle Step Response Time: 0.3ms, with balanced load

Position Detector
Linearity: 98%, Minimum, over 30 degrees
Scale Drift: 0.05 %/°C, Maximum
Zero Drift: 0.01 degrees/°C, Maximum
Repeatability, Short Term: 20 microradians
Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20%
Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20%

Model 6850P Moving Magnet Optical Position Detector Scanner(CTI 6850P系列扫描振镜)

Supports 10mm apertures

Galvanometer Specifications
All position detector specifications apply with Cambridge Technology servo driver after a 30-second warm-up. All angles are in mechanical degrees. Consult manual for complete operating instructions.

Mechanical
Rated Angular Excursion: 40°
Rotor Inertia: 0.5 gm*cm2, +/-10%
Torque Constant: 9.5X104dyne-cm/amp, +/-10%
Maximum Coil Temperature: 110° C
Thermal Resistance (Coil to Case): 1.5° C/Watt, Max

Electrical/Drive Mechanism
Coil Resistance: 1.5 Ohms, +/-10%
Coil Inductance: 160uH, +/-10%
Back EMF Voltage: 0.16mV/degree/sec, +/-10%
RMS Current: 4.3 Amperes at Tcase of 50°C, Max
Peak Current: 25 Amperes, Max
Small Angle Step Response Time: 0.5ms, with balanced load

Position Detector
Linearity: 98%, Minimum, over 30 degrees
Scale Drift: 0.05 %/° C, Maximum
Zero Drift: 0.01 degree/° C, Maximum
Repeatability, Short Term: 20 microradians
Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20%
Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20%
美国Cambrage Technology Inc (CTI)生产的各类高速光学扫描振镜,体积小,响应速度快,特别适合激光打标、舞台灯光等应用。

转载请注明出处。

免责声明

① 凡本网未注明其他出处的作品,版权均属于hth官方 ,未经本网授权不得转载、摘编或利用其它方式使用。获本网授权使用作品的,应在授权范围内使 用,并注明"来源:hth官方 ”。违反上述声明者,本网将追究其相关责任。
② 凡本网注明其他来源的作品及图片,均转载自其它媒体,转载目的在于传递更多信息,并不代表本媒赞同其观点和对其真实性负责,版权归原作者所有,如有侵权请联系我们删除。
③ 任何单位或个人认为本网内容可能涉嫌侵犯其合法权益,请及时向本网提出书面权利通知,并提供身份证明、权属证明、具体链接(URL)及详细侵权情况证明。本网在收到上述法律文件后,将会依法尽快移除相关涉嫌侵权的内容。

网友点评
0 相关评论
精彩导读
Baidu
map